TECHNICAL REQUIREMENTS
Additive must confirm the requirements shown in table:
Additive must confirm the requirements shown in table:
| Properties | Value | |||
|---|---|---|---|---|
| KP-20U-1 | KP-20U-2 | KP-20S | KP-10 | |
| Polyisobutene content, % wt., no less | 10 | 15 | 20 | 30 |
| Kinematic viscosity at 100°C, mm²/s,no more | 5000 | 5000 | 5000 | 1000 |
| Flash point COC, °C, no less | 140 | 140 | 140 | 150 |
| Thickening ability, mm²/s, no less | 10,0 | 13,0 | 13,0 | 3,5-11,0 |
| Mechanical impurities, % wt., no more | 0,1 | 0,1 | 0,1 | 0,1 |
| Ash content, % wt., no more | 0,08 | 0,08 | 0,08 | 0,08 |
Polyisobutene thickening additive KP-20U-1, KP-20U-2, KP-20S, KP-10 is an oil-filled polyisobutene. Industrial and transformer oils are used for the filling of polyisobutene
It used as one of the raw materials in the production of motor and other thickened mineral oils and various greases and sealants.
Additive is available in steel drums and can be transported by any of covered transportation means.
© ОАО ЕЗСК 2007-2025